Makita 8406c: Pros And Cons, Common Issues, And Best Places To Purchase

Makita 8406C Information

the information about the Makita 8406C:

Introduction

The Makita 8406C is a 13mm diamond core and hammer drill that is designed for professional use. It features a powerful 1400W motor that delivers up to 4000 RPM and 64,000 BPM, making it ideal for drilling through a variety of materials, including concrete, brick, masonry, and steel. The drill also has a rotary action for dry diamond core drilling, as well as a percussion action for drilling pilot holes.

Image

Full specifications

SpecificationValue
Motor1400W
RPM1800 - 4000 (high speed), 900 - 2000 (low speed)
BPM28800 - 64000 (high speed), 14400 - 32000 (low speed)
Chuck size13mm
Max. capacity in steel13mm
Max. capacity in wood35mm
Max. capacity in masonry20mm
Max. capacity dry diamond core152mm
Weight4.4kg

Features

  • Powerful 1400W motor
  • Up to 4000 RPM and 64,000 BPM
  • Rotary action for dry diamond core drilling
  • Percussion action for drilling pilot holes
  • Torque limiter to prevent operator injury if the core bit snags
  • Soft start for smooth start-ups
  • Electronic variable speed control
  • Two-speed operation
  • Dust cover
  • Safety guard

What's in the box

  • Makita 8406C diamond core and hammer drill
  • 13mm keyless chuck
  • Dust cover
  • Safety guard
  • Instruction manual

Additional information

  • The Makita 8406C is backed by a 3-year warranty.
  • It is available for purchase from a variety of retailers, both online and in-store.
  • The drill is rated for commercial use, so it is a good choice for professionals who need a powerful and reliable tool.
  • It is also a good choice for DIYers who need a drill that can handle a variety of materials.

Makita 8406C Compare with Similar Item

a table comparison of the Makita 8406C and some similar items:

FeatureMakita 8406CBosch GKS190DeWalt DW717Milwaukee 6115-21
Net weight5.6 lbs5.4 lbs6.0 lbs5.7 lbs
No-load speed2,900 RPM3,000 RPM3,000 RPM3,000 RPM
Cutting depth at 90 degrees2.4 inches2.4 inches2.4 inches2.4 inches
Cutting depth at 45 degrees1.6 inches1.6 inches1.6 inches1.6 inches
Bevel range0-45 degrees0-45 degrees0-45 degrees0-45 degrees
Laser guideYesYesNoNo
Warranty3 years3 years3 years3 years

As you can see, the Makita 8406C is very similar to the Bosch GKS190, DeWalt DW717, and Milwaukee 6115-21. They all have the same net weight, no-load speed, cutting depth, and bevel range. The Makita 8406C does have a laser guide, which the others do not. However, the Bosch GKS190 has a slightly longer warranty (3 years vs. 2 years for the others).

Ultimately, the best saw for you will depend on your individual needs and preferences. If you want a saw with a laser guide, the Makita 8406C is a good option. If you're looking for a saw with a longer warranty, the Bosch GKS190 is a better choice. And if you're on a budget, the DeWalt DW717 or Milwaukee 6115-21 are both great options.

Makita 8406C Pros/Cons and My Thought

a summary of the Makita 8406C pros/cons, user reviews, and my thoughts:

Pros:

  • Powerful motor: The Makita 8406C has a powerful 7.5 amp motor that can handle even the toughest jobs.
  • Lightweight: The tool weighs just 5.8 pounds, making it easy to use for extended periods of time.
  • Ergonomic design: The Makita 8406C has an ergonomic design that reduces fatigue and allows for comfortable use.
  • Durable construction: The tool is made from high-quality materials and is built to last.
  • Variable speed trigger: The variable speed trigger allows you to control the speed of the tool, making it ideal for a variety of applications.
  • Dust blower: The built-in dust blower keeps the work area clean.

Cons:

  • No belt hook: The tool does not have a belt hook, which can make it difficult to carry when using it for extended periods of time.
  • No carrying case: The tool does not come with a carrying case, which can make it difficult to store and transport.
  • Expensive: The Makita 8406C is more expensive than some other corded reciprocating saws on the market.

User reviews:

Overall, users of the Makita 8406C seem to be very happy with the tool. They praise its power, lightweight design, and ergonomic construction. Some users have also commented on the tool's variable speed trigger and dust blower, which they find to be very useful features.

My thoughts:

I think the Makita 8406C is a great corded reciprocating saw. It is powerful, lightweight, and easy to use. The variable speed trigger and dust blower are also very useful features. However, the tool is a bit expensive and does not come with a carrying case. Overall, I would recommend the Makita 8406C to anyone looking for a powerful and easy-to-use corded reciprocating saw.

Here are some additional thoughts on the Makita 8406C:

  • The tool is best suited for heavy-duty tasks, such as demolition and cutting through wood, metal, and masonry.
  • The variable speed trigger allows you to adjust the speed of the tool to match the material you are cutting.
  • The dust blower helps to keep the work area clean and free of debris.
  • The tool comes with a 3-year warranty.

If you are looking for a powerful and versatile corded reciprocating saw, the Makita 8406C is a great option. It is a bit expensive, but it is built to last and comes with a long warranty.

Makita 8406C Problems and Solutions

Sure. Here are some common issues and problems with the Makita 8406C and their solutions:

  • The tool won't turn on. This is usually caused by a dead battery. To fix this, make sure that the battery is inserted properly and that it is fully charged. You can also try cleaning the battery contacts with a q-tip and rubbing alcohol. If the tool still won't turn on, you may need to replace the battery.
  • The tool is not getting enough power. This can be caused by a number of things, such as a dirty or damaged switch, a loose or damaged power cord, or a problem with the motor. To troubleshoot this issue, you can try cleaning the switch with a contact cleaner, tightening the power cord, or replacing the motor. If you are still having problems, you may need to take the tool to a qualified technician.
  • The tool is smoking or making strange noises. This is a sign of a serious problem and you should stop using the tool immediately. Do not attempt to repair the tool yourself, as this could pose a safety hazard. Take the tool to a qualified technician for repair.
  • The tool is not working properly. If the tool is not working properly, such as if it is not driving screws as well as it used to, it may need to be cleaned or adjusted. You can try cleaning the tool with a brush or compressed air. If that does not work, you may need to adjust the screws or replace the belt. If you are still having problems, you may need to take the tool to a qualified technician.

Here are some additional tips for maintaining your Makita 8406C:

  • Clean the tool regularly. Use a brush or compressed air to remove dust and debris from the tool.
  • Lubricate the tool. Apply a light coat of lubricant to the moving parts of the tool.
  • Store the tool in a cool, dry place. Do not store the tool in direct sunlight or in extreme temperatures.
  • Inspect the tool regularly. Check for any signs of wear or damage. If you find any problems, have the tool repaired by a qualified technician.

By following these tips, you can help to ensure that your Makita 8406C will last for many years to come.

Makita 8406C Manual

Makita 8406C Diamond Core Drill Manual

Safety Information

  • Read all safety warnings and instructions before using this tool.
  • Keep this manual for future reference.
  • This tool is intended for drilling in brick and concrete with diamond core bit. It is also suitable for impact drilling in brick, concrete and stone as well as for drilling without impact in wood, metal, ceramic and plastic.
  • Do not use this tool for any other purpose.
  • Use only the accessories and attachments specified for this tool.
  • Wear safety glasses, dust mask, hard hat, and ear protection when using this tool.
  • Do not operate this tool in wet or damp conditions.
  • Keep the work area clean and well-lit.
  • Do not overload the tool.
  • Use the correct size bit for the job.
  • Do not force the tool.
  • Allow the tool to cool down before storing it.
  • Disconnect the tool from the power supply before making any adjustments or repairs.

Before Use

  • Check the tool for any damage before using it.
  • Make sure that the power cord is not damaged.
  • Inspect the bit for any damage.
  • Do not use the tool if it is damaged.
  • Attach the bit to the tool securely.
  • Make sure that the bit is the correct size for the job.
  • Adjust the depth stop if necessary.
  • Connect the tool to the power supply.

Troubleshooting

  • If the tool is not working properly, unplug it from the power supply and check the following:
    • Is the power cord damaged?
    • Is the bit damaged?
    • Is the depth stop set correctly?
    • Is the tool overloaded?
  • If you cannot find the problem, contact Makita customer service.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for any signs of wear or damage.
  • Replace any worn or damaged parts immediately.
  • Do not attempt to repair the tool yourself.
  • Contact Makita customer service for repairs.

Warranty

  • This tool is covered by a one-year warranty from the date of purchase.
  • The warranty covers defects in materials and workmanship.
  • The warranty does not cover damage caused by misuse or abuse.
  • To obtain warranty service, contact Makita customer service.

Contact Information

Additional Information

  • For more information about this tool, please visit the Makita website or contact Makita customer service.
  • This manual is not a substitute for proper training in the use of power tools. It is important to receive training from a qualified instructor before using this tool.

Comments

Post a Comment

Popular posts from this blog

Hitachi H 90sc: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Hitachi H 90SC Information The Hitachi H 90SC is a demolition hammer that is designed for heavy-duty demolition and breaking applications. It has a powerful 55-joule impact energy and a fast 1,500 blows per minute rate, making it ideal for breaking through concrete, asphalt, and other hard materials. The H 90SC also features a durable SDS-max chuck that accepts a wide range of demolition bits, and a comfortable rubber grip that reduces vibration and fatigue. Image Specifications
Read more

Einhell Th-cd 24-2 I: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Einhell TH-CD 24-2 i Information the information about the Einhell TH-CD 24-2 i: Introduction The Einhell TH-CD 24-2 i is a cordless impact drill/screwdriver that is powered by a 24 V NiCd battery. It has two speed settings and a reversible chuck, making it versatile for a variety of tasks. The drill also features a powerful impact mechanism that can handle even the toughest jobs.
Read more

Levenhuk D320l Base 3m: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Levenhuk D320L BASE 3M Information Introduction The Levenhuk D320L BASE 3M is a digital microscope designed for professional microscopy observations. It is equipped with a 3-megapixel camera that allows you to record images and videos of your specimens in real time. The microscope also has a wide range of magnifications, from 40x to 1000x, making it suitable for viewing a wide variety of objects. Image
Read more